01Electrium Mobility · Sep 2026

H-Bridge Motor Driver PCB

9 Vbrushed DC motor, both directions, up to 200 mA

Illustration

H-bridge schematic: a 9 volt rail, four switches S1 to S4, a motor between the two legs, and ground.S1S2S3S4M9 Vground

Forward: S1 and S4 are closed. Current runs from the 9 V rail through the motor, left to right, to ground.

A schematic of the circuit idea, drawn with generic switches. It is not my board's schematic or layout.

What I did

I'm on the electrical team at Electrium Mobility, Waterloo's student electric-bike team. I designed an H-bridge motor driver PCB in KiCad for a 9 V brushed DC motor, driven in both directions at up to 200 mA.

I selected the components, captured the schematic and laid out the board.

How I verified it

The design passed ERC and DRC.

The fabricated board was assembled by others. I bench-tested the assembled board for functionality, and it performed as designed.

Tools

  • KiCad (schematic capture, PCB layout)
  • Bench test equipment